Wednesday, August 18, 2010

Make Your Own: Foam Roller

I thought I was happy with my foam roller, I thought it was fine.  That was until I tried my friend JohnnyMac's Trigger Point foam roller.  It was amazing.  It had a hard core that really helped get deep into the muscles.  My puny little foam roller (actually made of thick Styrofoam) was no longer going to cut it so I decided to try to make my own for a pretty substantial savings.

Foam rollers are used for self myofascial release.  Myofascial release is a technique in which muscle tissue is stretched and manipulated to relieve tension in the fascia, the thin tissue covering the muscle fibers.  It works by breaking up fascial adhesions and also by manipulating certain neuromuscular receptors to allow muscles to release any tightness.  A foam roller allows you to use this technique on yourself.  This video shows how to use the foam roller to target specific areas.



Materials
4x10 PVC Pipe - $15
Yoga Mat - free to me
PVC Cement - free to me
Scissors
Electrical Tape
Hacksaw

Directions
Gather your materials and find a well ventilated space.  The PVC pipe is available at any Lowe's or Home Depot.  I got the whole long piece of it, but you can get a pre-cut piece.  I used an extra yoga mat I had lying around and PVC cement the my contractor had leftover.

Cut your PVC pipe into the lengths you'd like your foam rollers to be.  I did one of about 24" and three of around 13".  If you don't happen to have a contractor at your house with a large table saw already in use like I did, wrap the pipe with electrical tape at the cutting point and use the hacksaw to cut through the pipe.

Measure the length of yoga mat you'll need to completely cover the outside of the PVC pipe.  Leave about a half inch on either side.  Sure you can use a tape measure and be precise about it or you can use my method; put the pipe on the mat and cut.


Make sure your pipe is laid out straight on the mat, swipe PVC cement onto your PVC pipe or yoga mat in about 1.5" lengths.  After some experimentation, I found putting the cement onto the mat to be the most effective method.  Don't skimp on the cement.


Apply pressure on the cemented section.  Allow the first section to dry for about 5 minutes.


I clipped the ends of the first and last sections I cemented to make sure the edges stuck and I rubber banded the middle to make sure it didn't buckle and to make sure there was a nice smooth edge.


Continue working your way around the pipe in 1.5" sections, making sure to get cement to the edges of the pipe and to the last dried section.  It dries pretty quickly so you'll only need to give those sections a few minutes to dry.  Make sure to press down on these sections while they're drying.

When you get to the last bit of mat to be glued you may have to CAREFULLY trim the free edge of the mat so it meets with the cemented end perfectly.  Swipe cement on the last bit of PVC pipe, clamp the ends, apply pressure and let it dry for a while.

You'll probably have extra yoga mat at the edges of your pipe.  Cut them off with box cutters or very sharp scissors.

Roll out those tired, sore and stiff muscles.


16 comments:

quietnow said...

Very cool, thanks!

Brew Jones said...

Wow! What a great tutorial. I was just about to buy one of the foam rollers. Definitely going to make my own now. Thanks!

Jaimee said...

Glad this was helpful. Four years later and mine are still going strong!

Unknown said...

I thought I was happy with my foam roller, I thought it was fine. That was until I tried my friend JohnnyMac's Trigger Point foam roller. It was ... ifoamroller.blogspot.de

bnoversease said...

Good.great idea.i like it
Roller Coverings
tangential belts
, leather belts
flat belts

Anonymous said...

This was a cool article. Foam rollers are my go-to for post and even pre workout. I found this blog that you might find helpful. It has exercise and recovery tips!

Anonymous said...

Veery useful :))) thể hình

Dorothy said...

It's really super blog and all the information are awesome nice blog.
Rollga Foam Roller

thoitrangtreemkid said...

Great blog !!!
Thanks for sharing!!!
quần áo trẻ em tphcm
thời trang trẻ em tphcm
đồ trẻ em tphcm

Mẹo Giảm Cân said...

it's really good idea, i love it, thank you.
Giảm Cân Nhanh Tại Nhà
Những cách giảm cân an toàn và hiệu quả

Giảm Cân Nhanh Tại Nhà said...

thank for ur idea <3
Bài Tập Giảm Cân Nhanh Tại Nhà
Thực Đơn Giảm Cân
Bài Tập Giảm Cân
Những Bài Tập Giảm Cân Toàn Thân Hiệu quả

Mua Quần Áo Trẻ Em said...

Làm đẹp bằng trứng gà và cách làm mặt nạ lòng trắng trứng gà hiệu quả nhất

Mẹo Vặt Plus said...

Giảm cân hiệu quả và cách tính calo trong các bữa ăn của bạn

Anonymous said...

Informative blog. Foam roller is for muscle massage exercise fitness and stretching back pain relief equipment yoga and physical therapy. Here I observed the process of making the foam roller step by step. Also I found a video clip on this topic. Thanks for sharing. Along with this article, I would like to share some interesting facts about the hammerhead sharks which are a group of sharks that form the family sphyrnidae.

Sofiya said...


It is wonderful, looking at the time and effort you put into your weblog and detailed information you provide.
Lifting Stick

Garcia Evans said...

Thanks for sharing a wonderful information with us, it sounds like an interesting product!!!

Best Massage Roller Stick

LinkWithin

Related Posts with Thumbnails